» tagged pages
» logout

sorted by: recent | see : popular
Content Tagged with ipcop + qos

mhaddons: Forums / QoS / qos_ng and IMQ

You want to shape the upload from an internal client to the internet ? This has to be done on the red interface. Use the ip of the clkient as source ip. imq could only control incomming traffic by protocol or by port, not by destination ip, because the de

ipcop: del.icio.us tag/ipcop

mhaddons: Forums / QoS / limiting ip range

what happen if i put ip 192.168.1.1/24 for source ip and limit download to 128kbps? will each and every ip in that range have 128kbps? or sum of all those ip limited to a total of 128kbps? The sum of all those ips will be limited to a total of 128kbps.

ipcop: del.icio.us tag/ipcop

mhaddons: Forums / QoS / [qos_ng] source vs destinatination IP rule subtility

If you want to shape incommang traffic by ip you need to use your green interface (normally eth0).

ipcop: del.icio.us tag/ipcop

mhaddons: Forums / QoS / [poll] Discrepancy with maximum rate/bandwidth (apply to QOS NG for ipcop 1.4.11)

I've used QOS for many years. But QOS NG for ipcop 1.4.11 doesn't work all right. Once you establish a "maximum bandwidth" for a given class or for a rootclass, there's no way for the QOS to enforce correctly the given value. Before this version, QOS was

ipcop: del.icio.us tag/ipcop

mhaddons: Forums / QoS / qos_ng not doing anything?

Hi, tried 2 different IPCOP installs, one on the small cf card and another on HDD, none of which seem to have QOS_NG working. If i run QOS_NG from the console i get: starting qos (if enabled)..........."rate" is required. RTNETLINK answers: Invalid argume

ipcop: del.icio.us tag/ipcop

Page 1 | Next >>